EasyManua.ls Logo

Panasonic Lumix DC-FZ1000M2

Panasonic Lumix DC-FZ1000M2
325 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
202
Using Menu Functions
Menu list
[Custom] [Monitor / Display]
[Histogram]
You can display the histogram.
When set to [ON], you can move the display position of the histogram by pressing .
Direct touch operation is also possible from the recording screen.
Displays distribution of brightness in picture – e.g.
if the graph peaks at the right, this means there are
several bright areas in the picture. A peak in the center
represents correct brightness (correct exposure). This
can be used as a reference for exposure correction, etc.
(Example)
Dark OK Bright
When the histogram is not the same as that of the recorded picture under the following
conditions, histogram will be displayed in orange:
During Exposure Compensation.
When the flash fires.
When the correct exposure is not achieved, such as when the lighting is low.
[Guide Line]
Sets the pattern of the guidelines to be displayed while recording.
When you select [ ], you can move the position of the guideline by pressing .
You can also set the position directly by touching [ ] on the guideline of the recording screen.
The guideline is not displayed during panorama picture recording.
[Center Marker]
A cross [+] is displayed to indicate the center of the recording screen.

Table of Contents

Related product manuals