199
Using Menu Functions
Menu list
→ [Custom] → [Operation]
[Exposure Comp. Disp. Setting]
■
[Cursor Buttons (Up/Down)]
Set a function to assign to
on the exposure compensation screen.
Settings: [ ] ([Exposure Bracket]) / [OFF]
■
[Front/Rear Dials]
Set a function to assign to the dials on the exposure compensation screen.
[Exposure Comp.]/[Exposure Comp.]
[Flash Adjust.]/[Exposure Comp.]
[OFF]/[Exposure Comp.]
[Exposure Comp.]/[Flash Adjust.]
[Exposure Comp.]/[OFF]
[Operation Lock Setting]
You can set an object for which operation is disabled when [Operation Lock] is assigned
to the function button using [Fn Button Set] (→54) in the [Custom] ([Operation]) menu.
[Cursor] Disables the operation of the cursor button and [MENU/SET] button.
[Touch Screen] Disables the touch operation using the touch panel.
[Dial] Disables the operation of the rear dial, front dial and control ring.
[Video Button]
Enabling/disabling the motion picture button.
[Touch Settings]
Enabling/disabling the touch operation.
[Touch Screen] All touch operations.
[Touch Tab]
Operations of tabs, such as [
] displayed on the right side of the screen.
[Touch AF]
Operation to optimize the focus [AF] or both the focus and brightness
[AF+AE] for a touched subject.
[Touch Pad AF]
Operation to move the AF area by touching the monitor when the
viewfinder is in use.
(→101)
To Next Page
Loading...
