56
Basics
Assigning frequently used functions to the buttons (Function buttons)
●
When [Video Record] is assigned to the function button, you can start and stop recording motion
pictures in the same way as pressing the motion picture button.
●
When [Focus Area Set] is assigned to the function button, you can display the AF area or the MF
Assist position setting screen.
●
When [1 Shot “4K PHOTO”] is set, recording is performed in a specified 4K Photo Mode only
once. After the recording has finished, the camera returns to normal state.
●
When [Operation Lock] is assigned to the function button, you can disable the operations that
were set using [Operation Lock Setting] in the [Custom] ([Operation]) menu. To cancel the lock,
press the function button to which [Operation Lock] is assigned again.
●
When [Rec / Playback Switch] is assigned to the function button, you can switch between
recording mode and playback mode.
●
To restore the default function button settings, select [Restore to Default].
●
If the screen displays or similar, the displayed operation will be
performed instead of the function assigned to function buttons by
[Fn Button Set].
To Next Page
Loading...
