7. Recording Motion Pictures
170
∫ Conditions for outputting a time code to HDMI output
A time code is output to video from the HDMI output only when all the following conditions
are satisfied.
Applicable modes:
Display the microphone level on the recording screen.
Settings: [ON]/[OFF]
• When [Mic Level Limiter] is set to [OFF], [Mic Level Disp.] is fixed to [ON].
Applicable modes:
Adjust the sound input level to 19 different levels (j12 dB to i6dB).
• Displayed dB values are approximate.
Applicable modes:
The camera adjusts the sound input level automatically, minimizing the sound distortion
(crackling noise) when the volume is too high.
Settings: [ON]/[OFF]
In recording
• When [HDMI Time Code Output] is set to
[ON].
• In Creative Video Mode.
• When [Rec Format] is set to [AVCHD], [MP4
(LPCM)] or [MOV].
In playback
• When [HDMI Time Code Output] is set to
[ON].
• When playing back a motion picture recorded
with Creative Video Mode.
• When [HDMI Mode (Play)] in [TV Connection]
is set to [AUTO].
Displaying/setting the sound input level
[Mic Level Disp.]
> [Motion Picture] > [Mic Level Disp.]
[Mic Level Adj.]
> [Motion Picture] > [Mic Level Adj.]
[Mic Level Limiter]
> [Motion Picture] > [Mic Level Limiter]
MENU
MENU
To Next Page
Loading...
