4. Focus, Brightness (Exposure) and Color tone Settings
96
Applicable modes:
When [š], [ ], [Ø] or [ ] in Auto Focus Mode is selected, you can change the position
and size of the AF area.
1 Press [ ].
2 Select [š], [ ] or [Ø] and press 4.
3 Change the position and size of the AF area.
4 Press [MENU/SET] to set.
• AF area with the same function as [Ø] is displayed in the touched position, when the [š]
is selected.
Setting of the AF area is cleared when [MENU/SET] is pressed or [ ] is touched.
• Only [i] display (center point of selected group) will remain on the screen, when the [ ]
is selected.
Specifying the AF area position on the setting screen
When selecting [š], [ ], [Ø]
Button
operation
Touch
operation
Description of operation
3/4/2/1 Touching Moves the position
Pinching out/in
Changes the size
(in small steps if [š] or [Ø] has been selected)
/ s
Changes the size
(in large steps if [š] or [Ø] has been selected)
[DISP.] [Reset]
First time: The position is reset to the center
Second time: The size is reset to the default
To Next Page
Loading...
