Panasonic lumix DC-TZ90 Basic Operating Instructions

13
DVQX1246 (ENG)
Preparations
Charging the battery
• The battery that can be used with this unit is DMW-BLG10E.
• We recommend charging in a location where the ambient temperature is
between 10 °C and 30 °C (50 °F to 86 °F).
Make sure that the camera is turned off.
1
Insert the battery to this unit, and then connect this unit to the
AC adaptor (supplied) (
) or a PC ( )
[USB/CHARGE] socket
• This terminal is located at the bottom when the
camera is in an upright position.
• Always check the direction of the socket, and hold the plug straight to insert
or remove it. (If the cable is inserted in the wrong direction, the socket could
become deformed and cause faulty operation.) Also, do not insert into the
wrong socket. Doing so may cause damage to this unit.
USB connection cable
(supplied)
AC adaptor (supplied)
To the electrical outlet
Computer
Getting ready:
Turn on the computer.

Panasonic lumix DC-TZ90 Specifications

General

Sensor	1/2.3-inch High Sensitivity MOS Sensor
Effective Pixels	20.3 Megapixels
Lens	LEICA DC VARIO-ELMAR
Dimensions	112.0 x 67.3 x 41.2 mm
Focal Length	4.3 - 129mm (24 - 720mm in 35mm equivalent)
Aperture	F3.3 - F6.4
ISO Sensitivity	80-3200 (expandable to 6400)
Display	3.0-inch TFT Screen LCD Display (1040K dots)
Viewfinder	0.2-inch EVF (1166K dots)
Video Recording	4K UHD (3840x2160) at 30p/25p
Connectivity	Wi-Fi
Battery Life	Approx. 380 shots (CIPA standard)
Weight	Approx. 322g with Battery and SD Memory Card
Storage Media	SD/SDHC/SDXC memory card
Image Stabilization	5-axis Hybrid O.I.S. (Optical Image Stabilizer)