12
Preparations
DVQX1246 (ENG)
Inserting and removing the battery or SD memory
card (optional)
Make sure that the camera is turned off.
1
Slide the release lever ( ) to the [OPEN]
position and open the card/battery door
[OPEN] [LOCK]
2
Insert the battery and card, making sure
that their orientation is correct
• Battery: Insert the battery all the way firmly and
check that it is locked by lever (
).
• Card: Insert the card all the way firmly until it
clicks. Do not touch the terminal.
3
Close the door
Slide the release lever to the [LOCK] position.
■
To remove
• To remove battery
Move lever (
) in direction of
arrow.
• To remove card
Press the centre of the card.
Press
Pull out
●
Always use genuine Panasonic batteries (DMW-BLG10E).
●
If you use other batteries, we cannot guarantee the quality of this product.
●
Keep the memory card out of reach of children to prevent swallowing.
To Next Page
Loading...
