Panasonic Lumix DMC-F2 User Manual

Advanced-Viewing
- 95 -
b
[COPY]
You can copy recorded picture data from the built-in memory to a card or vice versa.
1
Select [COPY] on the [PLAYBACK] menu. (P21)
2
Press
e
/
r
to select the copy destination and then
press [MENU/SET].
N
: All the picture data in the built-in memory are copied
onto the card at one time.
"
step
4
.
M
: One picture at a time is copied from the card to the
built-in memory.
"
step
3
.
3
Press
w
/
q
to select the picture and then press
[MENU/SET].
4
Press
e
to select [YES] and then press [MENU/
SET].
• If you press [MENU/SET] while copying pictures from the
built-in memory to the card, the copying will stop halfway.
• Do not turn the camera off before copying is nished.
5
Press [
4
] to return the menu screen.
• Press [MENU/SET] to close the menu.
• If you copy from the built-in memory to a card, all the pictures are copied and then
the screen automatically returns to the playback screen.
Note
• If you copy picture data from the built-in memory to a card which does not have sufcient
free space, the picture data will only be copied halfway. We recommend using a card
which has more free space than the built-in memory (about 50 MB).
•
In case of “
N
”, you can copy an image le even if there is already a le in the
destination that has the same name (same le and folder numbers) by making a new
folder. In case of “
M
”, if a picture exists with the same name as the picture to be
copied in the built-in memory, it is not copied. (P98)
• It may take time to copy the picture data.
• Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied. (Even
if the pictures were recorded with a Panasonic digital camera, you may not be able to
copy them if they were edited on a PC.)
• [PRINT SET] on the original picture data will not be copied. Set the [PRINT SET] again
after copying is nished.

Panasonic Lumix DMC-F2 Specifications

General

Brand	Panasonic
Model	Lumix DMC-F2
Category	Digital Camera
Language	English