EasyManuals Logo

Panasonic Lumix DMC-FS4 User Manual

Panasonic Lumix DMC-FS4
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
Advanced-Shooting
- 76 -
&
[BURST]
For details on [REC] menu settings, refer to P21.
When you press and hold the shutter button several pictures are taken in succession.
Applicable modes:
;
1
5
[OFF]
&#
Burst speed
(pictures/second)
2.3
(DMC-FS42)
3
(DMC-FS4)
Approx. 1.7 (DMC-FS42)
Approx. 2 (DMC-FS4)
Number of
recordable
pictures
h
Max. 3 (DMC-FS42)
Max. 4 (DMC-FS4)
Depends on the remaining
capacity of the built-in
memory/card.
8
Max. 5 (DMC-FS42)
Max. 7 (DMC-FS4)
The burst speed is constant regardless of the transfer speed of the card.
The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the ash is not activated.
Note
When the Burst Mode setting is set to [
#
]
The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
You can take pictures until the capacity of the built-in memory or the card is full.
The focus is xed when the rst picture is taken.
When the burst speed is set to [
&
], the exposure and white balance are xed at the settings
used for the rst picture for the subsequent pictures as well. When the burst speed is set to [
#
],
they are adjusted each time you take a picture.
When the self-timer is used, the number of recordable pictures in Burst Mode is xed to 3.
If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not be optimal.
The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
Burst Mode is not cancelled when the camera is switched off.
If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture
data.
In Burst Mode, the ash setting is xed to Forced ash OFF [
o
].
Burst Mode cannot be used [HI-SPEED BURST], [FLASH BURST] and [STARRY SKY] in
[SCENE MODE].

Table of Contents

Other manuals for Panasonic Lumix DMC-FS4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic Lumix DMC-FS4 and is the answer not in the manual?

Panasonic Lumix DMC-FS4 Specifications

General IconGeneral
BrandPanasonic
ModelLumix DMC-FS4
CategoryDigital Camera
LanguageEnglish

Related product manuals