Panasonic Lumix DMC-FS4

Preparation
- 18 -
Setting Date/Time
(Clock Set)
• The clock is not set when the camera is shipped.
A
B
ON OFF
1
Turn the camera on.
A
[MENU/SET] button
B
Cursor buttons
• (When the language select screen is not displayed


step
4
.)
2
Press [MENU/SET].
3
Press
e
/
r
to select the language, and
press [MENU/SET].
• The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
Playback Mode.)
4
Press [MENU/SET].
5
Press
w
/
q
to select the items (year, month, day, hour, minute, display
sequence or time display format), and press
e
/
r
to set.
C
q
D
w
C
Time at the home area
D
Time at the travel destination (P
68)
4
: Cancel without setting the clock.
• Select either [24HRS] or [AM/PM] for the
time display format.
• AM/PM is displayed when [AM/PM] is
selected.
6
Press [MENU/SET].
• After completing the clock settings, turn the camera off. Then turn the camera
back on, switch to Recording Mode, and check that the display reects the
settings that were performed.
• When [MENU/SET] has been pressed to complete the settings without the clock
having been set, set the clock correctly by following the “Changing the clock
setting” procedure (P
19).