11
• Step 5. Set the INITIAL SETTING: (Refer to “CAUTION 1”)
[Caution for befor settings]
Once "NONE(JAPAN)" (Area for Japan) or "P" (Area for Noth America) is selected with "INITIAL SETTINGS", other areas will
not displayed even if "INITIAL SETTINGS" menu is displayed again, thus, the area can not be changed.
Select the area carefully.
Select the area with pressing “[ UP ] / [ DOWN ] of Cursor buttons”, and then press the “[ RIGHT ] of Cursor buttons”.
The only set area is displayed, and then press the “[ RIGHT ] of Cursor buttons” after confirmation.
(The unit is powered off automatically.)
Confirm the display of “PLEASE SET THE CLOCK” in English when the unit is turned on again.
• Step 6. CONFIRMATION:
The display shows “PLEASE SET THE CLOCK” when turn the Power on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
(When the “GT” or “GK” model suffix is selected, the display shows “PLEASE SET THE CLOCK” in Chinese.)
1) As for your reference Default setting condition is given in the following table.
• Default setting (After “INITIAL SETTINGS”)
MODEL VIDEO OUTPUT LANGUAGE DATE REMARKS
a) DMC-FS5P/PC/PL NTSC English Month/Date/Year
b) DMC-FS5E/EB/EG/GC/GN/PR PAL English Date/Month/Year
c) DMC-FS5EF PAL French Date/Month/Year
d) DMC-FS5EE PAL Russian Date/Month/Year
e) DMC-FS5GK PAL Chinese (simplified) Year/Month/Date
f) DMC-FS5GT NTSC Chinese (traditional) Year/Month/Date
g) DMC-FS5GJ PAL Thai Date/Month/Year
To Next Page
Loading...
Need help?
General
