2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precaution -------------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.)--------3
1.4. How to Discharge the Capacitor on Flash Top
PCB------------------------------------------------------------4
2Warning--------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord(For EB/GC) ----------------------6
2.4. How to Replace the Lithium Battery-------------------7
3 Service Navigation------------------------------------------------8
3.1. Introduction --------------------------------------------------8
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------8
3.3. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------9
4 Specifications ----------------------------------------------------12
5 Service Fixture & Tools ---------------------------------------13
5.1. When Replacing the Main PCB ----------------------13
5.2. Service Position ------------------------------------------13
6 Maintenace --------------------------------------------------------14
6.1. Cleaning Lens and LCD Panel -----------------------14
To Next Page
Loading...
Need help?
General
