Basic
27
VQT0Y19
w Other Settings in Simple mode
In simple mode, other settings are fixed as
follows. For more information about each
setting, refer to the page indicated.
• Focus range:
30 cm (0.98 feet) to c (Tele)
5 cm (0.16 feet) to c (Wide)
• [POWER SAVE] (P20):
[5MIN.]
• [ECONOMY] (P20):
[OFF]
• Self-timer (P43):
10 seconds
• Optical Image Stabilizer (P46):
[MODE2]
• Burst speed (P47):
[]
• [W.BALANCE] (P71):
[AUTO]
• [SENSITIVITY] (P73):
[]
• [ASPECT RATIO]/[PICT.SIZE]/[QUALITY]
(P74, 75):
– [ ENLARGE]:
: (7M)/
–[ 4SM6S/10M15cm]:
: (2.5M EZ)/
–[ E-MAIL]:
: (0.3M EZ)/
• [AF MODE] (P77):
[]
• [AF ASSIST LAMP] (P78):
[ON]
• [SLOW SHUTTER] (P78):
[1/8–]
• You cannot use the following functions in
simple mode.
– High angle mode
– White balance fine adjustment
– Exposure compensation
– Auto bracket
–[AUDIOREC.]
– [D.ZOOM]
– [COL.EFFECT]
– [PICT.ADJ.]
– [GUIDE LINE]
• You cannot set the following items in
simple mode.
– [TRAVEL DATE]
–[WORLDTIME]
w The Backlight Compensation
Backlight refers to when light comes from
the back of a subject.
In this case, the subject, such as a person,
will become dark.
If you move , compensating backlight ON
indication []appears and the
backlight compensation function is
activated. This function compensates the
backlight by brightening the whole of the
picture.
• If you move while [ ] is displayed,
[ ] disappears and the backlight
compensation function is canceled.
• We recommend using the flash when you
use the backlight compensation function.
(When using the flash, it is fixed to Forced
ON [ ].)
• The flash setting is fixed to AUTO/Red-eye
reduction [ ] when the backlight
compensation function is set to [OFF].
3
BACKLIGHT
3
BACKLIGHT
To Next Page
Loading...
