Menu Settings
91
VQT0Y19
• Use / to set the frame position for
pictures rotated vertically.
• The message [DELETE ORIGINAL
PICTURE?] appears.
4 Move
/
to select [YES] or [NO]
and then press [MENU/SET].
• The picture is overwritten when you
select [YES]. If you convert the aspect
ratio of a picture and then overwrite it,
you cannot restore it.
• A picture with the converted aspect ratio
is newly created when you select [NO].
• When the original picture is protected,
you cannot overwrite it. Select [NO] and
newly create a picture with the
converted aspect ratio.
5 Press [MENU/SET] twice to close
the menu.
• After converting the aspect ratio, the
picture size may become larger than that
of the original picture.
• The following pictures cannot be
converted.
– Pictures with audio
– Motion pictures
• Files that do not conform to the DCF
standard cannot be converted. DCF is an
abbreviation of “Design rule for Camera
File system”, stipulated by “JEITA (Japan
Electronics and Information Technology
Industries Association)”.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P80)
Usually, it is not necessary to format the
card. Format it when the message
[MEMORY CARD ERROR] appears.
Move
to select [YES] and then
press [MENU/SET].
• Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use a battery with sufficient battery power
(P13) or the AC adaptor (DMW-AC5;
optional) when formatting.
• Do not turn the camera off during
formatting.
• You cannot format an SD Memory Card or
an SDHC Memory Card when the card’s
Write- Protect switch is set to [LOCK].
• If the card cannot be formatted, consult
your nearest servicenter.
DELETE ORIGINAL
PICTURE?
ASPECT CONV.
NO
YES
SELECT SET
MENU
CANCEL
/SET
MENU
[FORMAT]
Initializing the card
/SET
MENU
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
NO
YES
SELECT SET
MENU
/SET
MENU
16
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@panasonic.com
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
To Next Page
Loading...
Need help?
General
Weight and Dimensions
