Basic
34
VQT0Y19
3 Move
/
to select the picture
and then move
to set.
(Only when selecting [MULTI DELETE])
• Repeat the above procedure.
• [ ] appears on the selected pictures. If
is moved again, the setting is
canceled.
• The icon [ ] blinks red if the selected
picture is protected and cannot be
deleted. Cancel the protect setting and
then delete the picture. (P87)
4 Press [ ].
5 Move
to select [YES] and then
press [MENU/SET] to set.
(Screen when selecting [MULTI DELETE])
•[DELETEALLPICTURES
IN THE MEMORY CARD?] is displayed
when using [ALL DELETE] and
[DELETE ALL EXCEPT ?] is
displayed when using
[ALL DELETE EXCEPT ].
• If you press [MENU/SET] while deleting
pictures using [ALL DELETE] or
[ALL DELETE EXCEPT ], the
deleting will stop halfway.
• Once deleted, pictures cannot be
recovered. Double-check pictures before
deleting them.
• Do not turn off the camera while deleting.
• When deleting pictures, use a battery with
sufficient battery power (P13) or the AC
adaptor (DMW-AC5; optional).
• It is possible to delete up to 50 pictures at
one time using [MULTI DELETE].
• The greater the number of pictures the
longer it takes to delete them.
• If there are pictures that are protected
[ ] (P87), do not conform to the DCF
standard (P32) or are in a card with the
Write-Protect switch slid to the [LOCK]
side (P16), they are not deleted even if
[ALL DELETE] or
[ALL DELETE EXCEPT ] is selected.
SELECT
MARK/UNMARK
7
MULTI DELETE
DELETE
EXIT
MENU
11
8 9
1210
SELECT
MULTI DELETE
SET
MENU
SET
/SET
MENU
DELETE THE PICTURES
YOU MARKED?
NO
YES
To Next Page
Loading...
