Panasonic LUMIX DMC-FX500 - Candle Light]; [Baby1];; [Baby2]

57
VQT1Q36
Advanced (Recording pictures)
This mode allows you to take pictures with a candle-lit atmosphere.
∫ Technique for Candle Light mode
•
This is more effective when taking pictures without using the flash.
• We recommend using a tripod and the self-timer for taking pictures.
Note
•
The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/1 m (3.28 feet)
(Tele) to ¶ (infinity)]
• The initial setting for [AF MODE] is [š].
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can select
to have these appear at the time of playback, or have them stamped on the recorded
image using [TEXT STAMP] (P92).
∫ Birthday/Name setting
1 Touch [SET] of [AGE] or [NAME].
2 Enter the birthday/name
Birthday: Touch [3]/[4] for each item to set year/
month/day, and touch [SET].
Name: For details on how to enter characters, read
the [TITLE EDIT] section on P88.
•
When the birthday or name is set, [AGE] or [NAME] is
automatically set to [ON].
• If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
3 Touch [EXIT] to finish.
∫ To cancel [AGE] and [NAME]
Select the [OFF] setting in step
1 of the “Birthday/Name setting” procedure.
Note
•
The age and name can be printed out using the “PHOTOfunSTUDIO-viewer-” bundled software
on the CD-ROM (supplied).
• If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
• The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/1 m (3.28 feet)
(Tele) to ¶ (infinity)]
• [INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO400].
• If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
• If the age is not properly displayed, check the clock and birthday settings.
• The birthday setting and name setting can be reset with [RESET].
• The initial setting for [AF MODE] is [š].
3 [CANDLE LIGHT]
: [BABY1]/; [BABY2]
DMC-FX500P_mst.book 57 ページ ２００８年２月２５日 月曜日 午後５時５４分