Panasonic LUMIX DMC-FX500 - Useful Functions at Travel Destinations; Recording Which Day of the Vacation You Take the Picture

63
VQT1Q36
Advanced (Recording pictures)
[REC] mode: ñ³±´²¿n
Useful Functions at Travel Destinations
For details on the [SETUP] menu settings, refer to P21.
If you set the departure date of the vacation in advance, the number of days that have
passed since the departure date (which day of the vacation it is) is recorded when you take
the picture. You can display the number of days that have passed when playing back the
pictures and stamp it on the recorded pictures with [TEXT STAMP] (P92).
•
The number of days that have passed since the departure date can be printed out using the
“PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied).
Recording which Day of the Vacation You Take the Picture
Select [TRAVEL DATE] from the [SETUP] menu, and
then move 1.
Move 4 to select [SET] and then press [MENU/SET].
Move 3/4/2/1 to set the departure date (year/
month/day), and then press [MENU/SET].
Move 3/4/2/1 to set the return date (year/month/
day), and then press [MENU/SET].
• If you do not want to set the return date, press [MENU/SET] while
the date bar is displayed.
Press [MENU/SET] to close the menu.
Take a picture.
• The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date
is set.
• When the travel date is set, [—] appears on the lower right of the screen.
1
2
3
4
5
6
DMC-FX500P_mst.book 63 ページ ２００８年２月２５日 月曜日 午後５時５４分