VQT1Q36
98
Advanced (Playback)
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P21)
Note
•
Audio dubbing may not work properly on pictures recorded by other equipment.
B [AUDIO DUB.]
Move 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
• The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Move 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is overwritten.)
• Audio is recorded from the built-in microphone on the camera.
• If you press [‚], the audio dubbing is canceled.
Press [MENU/SET] to stop recording.
• It will automatically stop after recording about 10 seconds without
pressing [MENU/SET].
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
1
2
3
4
DMC-FX500P_mst.book 98 ページ ２００８年２月２５日 月曜日 午後５時５４分
To Next Page
Loading...
