VQT1Q36
78
Advanced (Playback)
∫ Operations performed during slide show
[MUSIC]
Following music can be selected to play during slide show playback.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF]
•
[ ] ([AUTO]) can be used only if [CATEGORY] is selected. It will be played back with
[EFFECT] and [MUSIC] set for each category automatically.
• Preview screen is displayed when [PREVIEW] is touched. Touch [CANCEL] to cancel the
preview.
• [MUSIC] with the same name will be set for the selected [EFFECT]. Select [MUSIC] after
selecting [EFFECT].
[SET]
[DURATION] or [REPEAT] etc. can be set.
•
[DURATION] can be set only when [EFFECT] is set to [OFF].
• [AUDIO] will be displayed only when the [MUSIC] is set to [OFF]. Audio will be played along
with the still picture with audio by setting the [AUDIO] to [ON].
Note
•
Motion pictures cannot be played back as a slide show.
• It is not possible to add new music effects.
1 Display control panel by touching screen.
•
If no operation is done for 2 seconds, it will return to original status.
2 Operate control panel by touching.
A Back to previous picture
¢
B Play/Pause
C Ahead to next picture
¢
D Return to slide show set screen
E Reduce volume level
F Increase volume level
G Exit slide show
¢ These operations can be performed only in the
pause mode.
∫ Changing the slide show settings
You can change the settings for [EFFECT] and [MUSIC].
during the slide show playback on the slide show set screen.
[EFFECT]
This allows you to select the screen effect when switching
from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF]
•
When [URBAN] has been selected, the picture may appear in black
and white as a screen effect.
Slide show set screen
Item Settings
[DURATION] 1SEC/2SEC/3SEC/5SEC
[REPEAT] ON/OFF
[AUDIO] ON/OFF
A
A: Control panel
EXIT
CANCEL
t
j
u
i
C DA B
DMC-FX500P_mst.book 78 ページ ２００８年２月２５日 月曜日 午後５時５４分
To Next Page
Loading...
