Playback (advanced)
82
Playing Back Pictures with a TV Screen
∫ Playing back pictures with the
supplied cable
• Turn the camera and the TV off.
1 Connect the AV cable A
(supplied) to the [AV OUT] socket
of the camera.
• Connect the AV cable with the [ ]
mark facing the [1] mark on the
[AV OUT] socket.
• Hold B and then insert or pull the AV
cable straight.
2 Connect the AV cable to the video
input and the audio input sockets
of the TV.
• 1 Yellow: to the video input socket
• 2 White: to the audio input socket
3 Turn the TV on and select external
input.
4 Turn the camera on and then set
the mode dial to playback mode
[].
∫ Viewing pictures in other countries
When setting [VIDEO OUT] on the menu,
you can view pictures on a TV in other
countries (regions) which use the NTSC or
PAL system.
• Even if you set menu selection for
[VIDEO OUT] to [PAL], the output signal is
still NTSC in the recording mode.
∫ Playback pictures on TV with SD
Memory Card slot
A recorded SD Memory Card can be
played back on TVs with an SD Memory
Card slot.
If you play back pictures recorded using
[HDTV] mode on a High-Definition TV,
(HDTV has 16:9 aspect) the picture quality
will be better.
• Do not use any other AV cable except the
supplied one.
• Read the TV operating instructions too.
• You can display pictures on a TV only
when the mode dial is set to playback
mode [ ].
DIGITAL
AV OUT
DC IN
1
A
FX7PP.book 82 ページ ２００４年７月３０日 金曜日 午前１０時３７分
To Next Page
Loading...
