- 85 -
Advanced (Recording pictures)
∫ About focusing
When [CONTINUOUS AF] (P120) is set to [ON], and you focus on a subject, the camera
will maintain focus on that subject. To fix the focus position when beginning to record a
motion picture, set to [OFF].
Start recording by pressing the motion
picture button.
A Available recording time
B Elapsed recording time
•
Release the motion picture button right after you press it.
• The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
• The recording state indicator (red) C will flash while
recording motion pictures.
• The screen will become dark momentarily, and
recording will start after adjusting the display.
Stop the recording by pressing the motion picture button again.
• Sound will go off when pressing the motion picture button indicating start/stop of motion
picture recording.
Sound volume can be set in [BEEP LEVEL] (P26).
• If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
To Next Page
Loading...
