Panasonic Lumix DMC-FX70 - Page 86

Advanced (Recording pictures)
- 86 -
Note
•
The screen will change as following when the motion picture button is pressed in steps 3 and 4 .
¢1 Touch [ ] to display the available recording time before recording motion pictures.
¢2 The screen that is displayed during Motion Picture Mode setting is different depending on the
setting of the
[REC MODE].
• Refer to P120 for the [MOTION PICTURE] Mode menu.
• The flash setting is fixed to [Œ].
• Refer to P194 for information about the available recording time.
• The available recording time displayed on the screen may not decrease regularly.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
• The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
• The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
• When operating the zoom in recording motion pictures, it may take time to come into focus.
• If the Extra Optical Zoom was used before pressing the motion picture button, recordable area
will be changed drastically since these settings are cancelled.
• Even if the aspect ratio setting is the same in still and motion pictures, the angle of view may
change at the start of the motion picture recording.
When [ REC AREA] (P27) is set to [ON], angle of view during motion picture recording is
displayed.
• [STABILIZER] is fixed to [MODE1] in recording motion pictures.
• In recording motion pictures, the following functions cannot be used.
– [], [ƒ], [Ù] in the AF mode
(It will switch to [
Ø].)
– Direction Detection function
– Extra Optical Zoom
– [FACE RECOG.]
– [ISO LIMIT SET]
• It is recommended to use a fully charged battery or AC adaptor (optional) when recording
motion pictures.
• If while recording motion pictures using the AC adaptor (optional) and the power supply is cut
off due to a power outage or if the AC adaptor (optional) is disconnected etc., the motion picture
being recorded will not be recorded.
• Zoom speed may be slower than normal in recording motion pictures.
A Still picture recording
screen
¢1
B Motion Picture Mode
setting
¢2
C Motion picture
recording screen
D Still Picture Mode
setting
×
7
7
AUTO
AUTO
AUTO
Q
Q
0
0
3s
3s
R1m21s
R1m21s
R1m21s
C
C