VQT3S34 (ENG)
28
• Before inserting the CD-ROM, close all running applications.
Check the environment of your PC.
• Operating environment of “PHOTOfunSTUDIO 6.4 HD Lite Edition
with Wi-Fi”
– OS:
Windows
R
XP (32bit) SP2/SP3,
Windows Vista
R
(32bit) SP1/SP2,
Windows
R
7 (32bit/64bit)
– CPU:
Pentium
R
III 500 MHz or higher (Windows
R
XP),
800 MHz or higher (Windows Vista
R
),
1 GHz or higher (Windows
R
7)
– Display:
1024k768 pixels or more (1920k1080 pixels or more recommended)
– RAM:
512 MB or more (Windows
R
XP/Windows Vista
R
),
1 GB or more (Windows
R
7 32bit),
2 GB or more (Windows
R
7 64bit)
– Free hard disk space:
450 MB or more for installing software
• Refer to the operating instructions of “PHOTOfunSTUDIO 6.4 HD Lite
Edition with Wi-Fi” (PDF) for further operating environment.
Insert the CD-ROM with the supplied software.
• When you insert the supplied CD-ROM, the install menu will start.
Click on the [Applications] on the install menu.
Click on the [Recommended Installation].
• Proceed with installation according to messages appearing on the
screen.
Note
•
The software compatible with your PC will be installed.
• “PHOTOfunSTUDIO 6.4 HD Lite Edition with Wi-Fi” is not compatible with Mac.
Installing supplied software
DMC-FX90EB-VQT3S34_mst.book 28 ページ ２０１１年８月２４日 水曜日 午前１０時４３分
To Next Page
Loading...
