Panasonic Lumix DMC-FZ100P

26
8.3. Disassembly Procedure
No. Item Fig Removal
1 Rear Case Unit (Fig. D1) Card
Battery
3 Screws (A)
2 Screws (B)
(Fig. D2) Shoe Spring
2 Screws (C)
P9001(Connector)
P9003(Connector)
FP9003(Flex)
Rear Case Unit
2 Main P.C.B. (Fig. D3) 1 Screw (D)
3 Screws (E)
FP9001(Flex)
FP9002(Flex)
FP9004(Flex)
FP9005(Flex)
PS9001(Connector)
FP9006(Flex)
FP9008(Flex)
FP9010(Flex)
P9005(Connector)
Jack Holder
Main P.C.B.
3 Top Operation Unit (Fig. D4) 1 Screw (F)
Top Operation Unit
4 Battery Case Unit (Fig. D5) 1 Screw (G)
P8003(Connector)
P8004(Connector)
Battery Case Unit
5EVF Unit
Flash Unit
(Fig. D6) 1 Screw (H)
EVF Unit
Flash Unit
6 Lens Unit (Fig. D7) Lens Heat Sink
2 Screws (I)
(Fig. D8) Lens Unit
7 AF LED P.C.B. (Fig. D9) 1 Screw (J)
Strap Holder (R)
Side Frame (R)
Jack Cover
1 Screw (K)
FP9301(Flex)
(Fig. D10) Remote Cover
Remote Holder
AF Light Case
AF LED P.C.B.
8 AF/MF Flex Unit (Fig. D11) 2 Locking tabs
AF/MF OP Support
(Fig. D12) 2 Locking tabs
AF/MF OP Slide Knob
AF/MF OP Button
AF/MF OP Spring Unit
AF/MF OP Case Unit
AF/MF Flex Unit
9 Flash P.C.B. (Fig. D13) Condensor Cover
1 Locking tab
1 Screw (L)
2 Hanging parts
Flash P.C.B.
(Fig. D14) Discharge of the
E.capacitor
10 EVF Unit (Fig. D15) 2 Locking tabs
EVF Unit
11 Hot Shoe Unit
ECM Flex Unit
Flash Unit
(Fig. D16) 3 Screws (M)
2 Screws (N)
Hot Shoe Unit
(Fig. D17) 4 Locking tabs
Flash Case Top
Flash Shaft
Flash Pop Up Spring
(Fig. D18) 2 Locking tabs
Flash Unit
MIC Damper
MIC Cushion
ECM Flex Unit
12 Speaker (Fig. D19) 1 Screw (O)
Wire Fix Tape
1 Hanging part
(Fig. D20) Speaker Fix Plate
Speaker
13 LCD Unit
Hinge P.C.B.
(Fig. D21) 2 Screws (P)
Wire Fix Tape
Hinge Arm Cover Top
Hinge Arm Cover Bottom
2 Screws (Q)
(Fig. D22) 2 Ribs
Hinge Plate
1 Screw (R)
LCD Unit
Hinge P.C.B.
14 LCD Unit (Fig. D23) 4 Screws (S)
6 Locking tabs
LCD Case Bottom
LCD Hinge Unit
FP4101(Flex)
LCD Case Top
LCD Unit
No. Item Fig Removal