Panasonic Lumix DMC-FZ100P

S-2
Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard.
Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester.
S2.1. Flash P.C.B.
S2. Voltage Chart
REF No. PIN No. POWER ON
Q8004 1 8
Q8004 2 8
Q8004 3 0
Q8004 4 0
Q8004 5 8
Q8004 6 8
QR8001 1 0
QR8001 2 4.8
QR8001 3 0
QR8001 4 5.2
QR8001 5 4.8
QR8001 6 0
QR8002 E 0
QR8002 C 4.8
QR8002 B 0
QR8003 E 0
QR8003 C 0
QR8003 B 3