- 143 -
Playback/Editing
Recorded motion picture can be divided in two. It is recommended for when you want to
divide a part you need with a part you do not need.
It cannot be restored once divided.
Note
•
[VIDEO DIVIDE] may not be performed on motion pictures recorded with other equipment.
• Motion pictures cannot be divided at a location close to the start or end of the motion picture.
• The order of pictures will change when motion pictures are recorded in [MP4], or with
[HIGH SPEED VIDEO] in Scene Mode if divided.
It is recommended to search these motion pictures by using [CALENDAR] or [VIDEO ONLY] in
the [MODE PLAY].
• Motion pictures with a short recording time cannot be divided.
[VIDEO DIVIDE]
Select [VIDEO DIVIDE] on the [PLAYBACK] Mode menu. (P48)
Press 2/1 to select the motion picture to divide, and then press
[MENU/SET].
Press 3 at the location to divide.
• Motion picture is played back from the same location when 3 is
pressed again.
• You can finely adjust the location for division by pressing 2/1
while the motion picture is paused.
Press 4.
• Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
• Motion picture may be lost if the card or battery is removed while processing the
dividing.
To Next Page
Loading...
