- 67 -
Recording
Applicable modes:
Taking Pictures using the Flash
A To open the flash
Press the flash open button.
B To close the flash
Press the flash until it clicks.
•
Be sure to close the flash when not in use.
• The flash setting is fixed to [Œ] while the flash
is closed.
Note
•
Be careful not to catch a finger when closing a flash bulb.
Set the flash to match the recording.
•
Open the flash.
Select [FLASH] in the [REC] Mode menu. (P48)
Press 3/4 to select a mode and then press [MENU/SET].
• Exit the menu after it is set.
Switching to the appropriate flash setting
To Next Page
Loading...
