Recording
- 80 -
Applicable modes:
Setting the Light Sensitivity
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Press 1 [].
Press 3/4 to select the ISO sensitivity and then
press [MENU/SET] to set.
¢ When the [ISO LIMIT SET] of [REC] Mode menu (P112) is set to anything except
[AUTO], it is set automatically within the value set in [ISO LIMIT SET].
ISO sensitivity
Settings
AUTO
The ISO sensitivity is automatically adjusted according to the
brightness.
• Maximum [ISO800]
¢
(Intelligent)
The ISO sensitivity is adjusted according to the movement of
the subject and the brightness.
• Maximum [ISO1600]
(With the flash on [ISO800])
¢
100/200/400/800/1600/3200
The ISO sensitivity is fixed to various settings.
(When the [ISO INCREMENTS] in [REC] Mode menu
(P112) is set to [1/3 EV], items of ISO sensitivity that can
be set will increase.)
[ISO100] [ISO3200]
Recording location
(recommended)
When it is light (outdoors) When it is dark
Shutter speed Slow Fast
Noise Less Increased
Jitter of the subject Increased Less
To Next Page
Loading...
