- 55 -
Basic
• MF position will be memorized in the following cases:
– Turning the camera off
– When switching to a type of focus other than Manual Focus
– When switched to Playback Mode
• Zoom position will be set all the way to wide when the [ZOOM RESUME] is set to [OFF].
• When [MF RESUME] is set to [OFF], MF position will be the distance focused at the time of
recording in Manual Focus.
• Depending on the recording conditions, the memorized MF positions and resumed MF
positions might be different.
[REMAINING DISP.]
This will switch display between the number of recordable
pictures and available recording time.
[REMAINING SHOTS]:
This will display the number of recordable pictures for still
pictures.
[REMAINING TIME]:
This will display the available recording time for motion pictures.
[HIGHLIGHT]
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
[OFF]/[ON]
•
If there are any white saturated areas, we
recommend compensating the exposure towards
negative (P76) referring to the histogram and then
taking the picture again. It may result in a better
quality picture.
• There may be white saturated areas if the distance
between the camera and the subject is too close
when taking pictures with the flash.
• Highlighting does not work during Multi Playback,
Calendar Search, Playback Zoom, or Motion Picture
Playback.
[OFF] [ON]
[LENS RESUME]
It is possible to memorize the zoom position and the MF (Manual
Focus) position when the power is switched [OFF].
[ZOOM RESUME]:
It will automatically return to the zoom position when the power
was switched [OFF], next time you turn the power [ON].
[OFF]/[ON]
[MF RESUME]:
It will memorize the MF position set with the Manual Focus. It will
resume the memorized Manual Focus position when you return to
Manual Focus Recording.
[OFF]/[ON]
To Next Page
Loading...
