- 38 -
Basic
• Set the drive mode to [ ] by pressing 4().
1
Select the Recording Mode.
Taking a still picture
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
• Aperture value and shutter speed are displayed. (It will
flash in red if the correct exposure is not achieved, except
when set to flash.)
• When the image is correctly focused, the picture will
be taken, since the [Focus Priority] (P167) is set
initially to [ON].
3
Press the shutter button fully (push it in
further), and take the picture.
To Next Page
Loading...
