- 47 -
Basic
1 Touch [ ].
2 Touch [ ] to display the setting screen.
•
The settings screen can also be displayed from the recording
screen by pressing cursor button 1.
3 Drag the slide bar to set.
•
This will adjust the color of the image from a reddish color to a
bluish color.
• Setting can also be performed by rotating the rear dial.
• Touch [ ] again to return to the recording screen. You can
also return to the recording screen by pressing the cursor
button 1.
Note
•
If you touch [ ] during the adjustment, you can take a picture also
by touching [ ].
• The brightness and color settings will return to the default (center
point) when this unit is turned off or the camera is switched to
another Recording Mode.
Setting color
To Next Page
Loading...
