31
[2). [BODY RELATIVES]
TITLE
"T1
0
()
C
en
ITEMS DESCRIPTION
*
In
the following conditions, the focus may
be
out of focus, no matter the kind of subject.
The picture
is
out of focus although the focus Therefore, adjust the focus again
by
rotating the Focus ring.
is adjusted
in
MF mode at once. *After "in-focus" condition, Zoom condition has been changed.
*Power switch
is
turned OFF and ON again.
Focus does not become
in
focus condition.
MF(Manual Focus)ASSIST does not work.
Face detection does not work.
The subject is not focused properly.
Focus does not change.
*If the shooting distance
is
less than the Minimum requirement distance for focus,
the focus may not be brought into focus,
no
matter the kind of subject.
0.
2m
1--
(
0-'
.
6-6-fe_
e_
t
)....:.._
___
:
....
) ©
0.3 m (0.98 feet)
0.2 m (0.66 feet) 00 l
o
t---'-----'----
.3 m (0.98 feet) 00 @
0.9 m (3.0 feel)
00
} ©
®
Focus
d1Stance
reference
mark
@
Focus
di
slance
reference
line
© When the interchangeable lens
(H
-
PS14042)
Is
used
0.2 m (0.66 feet)
(W
i
de
to local length 20
mm
)
0.3 m (0.
98
reet) (focal length
21
mm
lo
Tele)
@ When the lnte,changeable lens (H-FS 1442A) Is used
0.2 m (0.66 leet) (Wide to local length 20 mm)
0.3 m (0.
98
reet) (local length 21
mm
to
Tele)
® When the interchangeable lens
(H
-
FS45150)
is used
0.9 m (3.0 reet)
*The MF assist function is that the certain area image is able to enrage about 4/5/10 times to make
easier to focus. (It can be changed enlarged value
by
rotating the rear dial or clicking the loupe
icons on display.)
*It does not activated if the [ Focus Mode ] is set to other than [ MF ] mode.
*It does not activated when using the Digital Zoom or recording motion picture.
Loupe
icons
*It does not activated if [ MF
ASSIST]
is
set to OFF.
ml
ti.'!
⇒
[ CUSTOM
MENU]
(2/6) ----- [ MF
Assist]
(To display the MF assist, moving the focus lever, rotating the focus ring, or touching the screen.)
*Select AF mode to face detection.
(In
[
iA]
mode, it is automatically assigned according with scene.)
(Press the left side cursor button to display the AF mode menu.)
*It does not activated when using the Digital Zoom.
*It does not activated if the focus mode set to MF.
*When get a fingerprint, dirt on the lens, resulting
in
the subject being out of focus.
*The subject
is
beyond the focus range of the camera.
*There is camera shake Giller) or the subject
is
moving slightly.
*The focus indication green mark
is
lights at the top right hand corner on the LCD when the subject is
focused.
*The shutter speed will become slower and the optical image stabilizer function may not work properly
when taking pictures especially
in
dark places.
*Focus
& Exposure condition is locked when the [AF / AE Lock] button.
⇒
[ CUSTOM
MENU]
(1/6) ----- [AF/AE Lock] (AE LOCK, AF LOCK, AF/AE LOCK, AF-ON)
*It
can
be reset when [ AF / AE Lock ] button is pressed again.
*By assigning [ AF/AE
LOCK]
to [ Q.MENU/Fn1 ] or [
Fn2]
button, [ AF/AE
LOCK]
button will
be
available.
⇒
[CUSTOM MENU] (4/6) ----- [
Fn
Button Set ](Fn1 ,Fn2) ----- [ AF/AE
LOCK]
*Focus does not hold even if [ AF/AE
Lock]
button is pressed if the [ AF/AE
Lock]
is
Although [ AF/AE
LOCK]
button is pressed, selected [ AE
].
ii
does not hold the Focus, only Exposure
is
⇒
[ CUSTOM
MENU]
(1/6) ----- [ AF/AE
Lock]
(AE LOCK, AF LOCK,
AF
/AE LOCK, AF-ON)
locked. *AF Lock only is effective when taking pictures
in
Manual Exposure Mode.
*In the Manual Focus condition, it
is
only worked as [ AE
lock]
function.
It
does not turn to the "AFC" mode.
(Motion prediction does not work.)
Some
of
the Flash setting(s) are not
able
to
select.
[ AUTO
BRACKET]
does not work.
The subject is too
bright/
too dark
with Flash.
White round spots appear
on
the
recording picture
*Confirm the setting of the focus mode (AFS, AFF, AFC, MF).
*The focus
is
fixed on the first picture, when subject is dark or the burst speed is set to [
SH
].
*In Panorama Shot Mode, [
AFF]
and
[AFC]
cannot be set.
*In accordance with the [
REC]
mode, selectable flash settings may be differ.
*Only one picture can be taken when the Flash is fired.
*Confirm that the picture is taken within Flash range or not.
*If you take a picture with flash
in
a dark place or indoors, white round
spots may
be
appear on the picture caused by the flash reflecting
of
particles
of
dust
in
air. This
is
not a malfunction.
*A characteristic
of
this is that the number of round spots and their
position differ in every picture.
To Next Page
Loading...
