137
VQT3A36
Playback/Editing
Editing Burst Pictures
You can edit the pictures in the Burst Picture Group as single pictures or in group units
(including all pictures in group).
∫ Editing single pictures within a Burst Picture Group
•
The following editing menu can be used.
– [TITLE EDIT] (P143), [TEXT STAMP] (P144), [CROPPING] (P147), [ASPECT CONV.]
(P147), [FAVORITE] (P149), [PRINT SET] (P150), [PROTECT] (P151)
To select an image during continuous playback of burst pictures (Burst Play menu)
To select an image during normal playback
1 Select an image during continuous playback, and pause
by touching [ ].
2 Press [MENU/SET] to display the [PLAYBACK] Mode
menu.
3 Press 3/4 to select the item, and press 1.
4 Press 3/4 to select [SINGLE] or [MULTI] and then press
[MENU/SET].
•
You cannot select [SINGLE] or [MULTI] when [CROPPING] or
[ASPECT CONV.] is selected.
5 Select the picture, and perform editing.
For details on the various ways of editing, refer to “Using the
[PLAYBACK] Mode Menu” (P140).
1 Select the item on the [PLAYBACK] mode menu and then
press 1. (P55)
2 Press 3/4 to select [SINGLE IN BURST GROUP] or
[MULTI IN BURST GROUP] and then press [MENU/SET].
•
The [MULTI IN BURST GROUP] feature is disabled when
[CROPPING] or [ASPECT CONV.] is selected.
• Only the Burst Picture Groups with burst icon [˜] are displayed.
3
Select the Burst Picture Group and then press [MENU/SET].
• Pictures within the group are displayed.
4 Select the picture, and perform editing.
For details on the various ways of editing, refer to “Using the
[PLAYBACK] Mode Menu” (P140).
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 137 ページ ２０１０年１０月１９日 火曜日 午前１１時３分
To Next Page
Loading...
