45
Wi-Fi/NFC
(ENG) SQT0790
• When [Wi-Fi Password] is set to the default setting [OFF], third parties may intercept
Wi-Fi radio waves and collect the content of communications. Set [Wi-Fi Password] to
[ON] to enable the password.
• For details, refer to the “Operating Instructions for advanced features (PDF format)”.
• If [ ] is not displayed on the smartphone, the NFC function of the smartphone is disabled.
Read the operating instructions of your smartphone and enable it.
1 On the smartphone, start “Image App”.
•
If a message appears stating that a camera search is in progress, close the message.
2 While [ ] is displayed on the screen of
the smartphone, touch the smartphone to
[ ] of the camera.
3 When the connection confirmation screen
is displayed on the camera, select [Yes].
4 Touch the smartphone to [ ] of the
camera again.
•
Steps 3
through 4 are not required from the
second time on.
When using an Android device
Setting up a connection using the NFC function
∫ Compatible models
This function can be used with the NFC compatible device with Android. (excluding
some models)
•
For information on the operation and settings of NFC-compatible smartphones, refer to the
operating instructions of your device.
DMC-GX8A&GX8H&GX8K_GCGH-SQT0790_eng.book 45 ページ ２０１５年７月８日 水曜日 午前９時１１分
To Next Page
Loading...
