Wi-Fi/NFC
46
SQT0790 (ENG)
After use, terminate the connection to the smartphone.
1 Select the camera’s menu items to terminate the Wi-Fi connection.
•
Confirmation screen is displayed. It is ended when [Yes] is selected.
• You can also terminate the connection by pressing [Wi-Fi] on the camera.
2 On the smartphone, close “Image App”.
1 Connect to a smartphone. (P44)
2 Operate the smartphone.
1 Connect to a smartphone. (P44)
2 Operate the smartphone.
•
When you play a motion picture, the camera transmits it to the “Image App” at a reduced data
size. As a result, its image quality differs from that of the actual recorded motion picture. In
addition, depending on the smartphone or conditions of use, the image quality may deteriorate
or the sound may skip during motion picture or picture playback.
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Terminating the connection
> [Setup] > [Wi-Fi] > [Wi-Fi Function]
(If you are using an iOS device)
On the screen of “Image App”, press the home button to close the app.
(If you are using an Android device)
On the screen of “Image App”, press the return button twice to close the app.
Taking images via a smartphone/tablet (remote recording)
1 Select [ ].
2 Record an image.
•
The recorded images are saved in the camera.
• Some settings are not available.
Playing back images in the camera
1 Select [ ].
2 Touch the image to enlarge it.
DMC-GX8A&GX8H&GX8K_GCGH-SQT0790_eng.book 46 ページ ２０１５年７月８日 水曜日 午前９時１１分
To Next Page
Loading...
