121
3. Recording Modes
Registering your preferred settings (Custom Mode)
Recording Mode:
You can register the current camera settings as custom settings.
If you then record in Custom Mode, you can use the registered settings.
•
Initial setting of the Program AE Mode is registered as the custom settings initially.
To allow recording using the same settings, up to 5 sets of current camera settings can be
registered using [Cust.Set Mem.]. (
, , , , )
Preparations:
Set in advance the Recording Mode you wish to save and select the desired menu
settings on the camera.
1
Select the menu. (P63)
2
Press 3/4 to select the custom set to register and then press
[MENU/SET].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• The following menu items are not registered as custom settings.
Registering Personal Menu Settings (Registering custom settings)
> [Custom] > [Cust.Set Mem.]
The settings are registered for on the mode dial.
• You can record using by simply rotating the mode dial to the
corresponding position. If you register the custom settings you
use often, it is then convenient to use them.
The settings are registered for on the mode dial.
• You can record using by simply rotating the mode dial to the
corresponding position. If you register the custom settings you
use often, it is then convenient to use them.
The settings are registered for on the mode dial.
• You can register up to 3 sets of custom settings and use the
different sets as condition demand.
[Rec] menu [Setup] menu [Custom] menu [Playback] menu
– Data registered with
[Face Recog.]
– The [Profile Setup]
setting
– All menus – [Touch Scroll]
– [Menu Guide]
– [Rotate Disp.]
– [Picture Sort]
– [Delete
Confirmation]
MENU
To Next Page
Loading...
Need help?
General
