311
11. Using the Wi-Fi/NFC Function
Printing Wirelessly
1 Select the menu. (P63)
2 Select [Via Network] or [Direct], and connect. (P324)
3 Select a printer you want to connect.
4 Select pictures, and then print.
•
The procedure for selecting pictures is the same as the one for when the USB connection
cable is connected.
For details, refer to P346.
• To terminate the connection, press [ ].
(You can also terminate the connection by pressing [Wi-Fi]. (P287))
Not available in these cases:
•
Motion pictures and 4K burst files cannot be printed.
You can send images to a compatible printer, and print
them wirelessly.
Preparations
To print out recorded pictures wirelessly, you must use a printer that supports PictBridge
(wireless LAN)
¢
.
¢ Compliant with the DPS over IP standards.
• For details on the PictBridge (wireless LAN-compatible) printer, contact the respective
company.
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
[Send Images Stored in the Camera] > [Printer]
MENU
To Next Page
Loading...
Need help?
General
