83
2. Getting Started/Basic Operations
• Always reset the camera when disposing or selling it to prevent personal information saved
within the camera from being misused.
• Always reset the camera after making a copy of personal information when sending the camera
in to be repaired.
• Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots that do not exist in the subject get recorded.
• Turn the camera off and on after the pixels are corrected.
• Dust Reduction Function will operate automatically when the camera is turned on, but you can
use this function when you see dust. (P395)
• Refer to P33 for details.
[Reset Wi-Fi Settings]
Reset all settings in the [Wi-Fi] menu to factory default settings.
(Excluding [LUMIX CLUB] (P323))
[Pixel Refresh]
It will perform optimization of imaging device and image
processing.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
[Format]
—
To Next Page
Loading...
Need help?
General
