11. Using the Wi-Fi/NFC Function
290
• You can also set up a connection by entering a password manually. For details, refer to P294.
• When terminating the connection, refer to P296.
You can easily set up a direct connection to your smartphone without entering a password.
1 Select the menu on the camera. (P63)
A SSID
• When the camera is ready to be connected to the
smartphone, the SSID is displayed.
• You can also display the information by pressing [Wi-Fi] on
the camera.
2 Turn on the Wi-Fi function in the setting menu of the
smartphone.
3 On the Wi-Fi setting screen of the smartphone, select the
SSID displayed on the camera.
4 On the smartphone, start “Image App”.
5 When the connection confirmation screen is displayed on
the camera, select [Yes] to connect. (For first time
connection only)
Connecting to a smartphone/tablet
Connecting easily without a password
For both iOS devices (iPhone/iPod touch/iPad) and Android devices P290
Connecting with a password
If you are using an iOS
device
[iPhone/iPod touch/iPad]
If you are using an Android device
Is your device compatible with the NFC function?
Yes No
Using the QR code to set
up a connection
P293
Setting up a connection
using the NFC function
P291
Using the QR code to set
up a connection
P293
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Connecting without using the password
> [Setup] > [Wi-Fi] > [Wi-Fi Function]
> [New Connection] > [Remote Shooting & View]
MENU
To Next Page
Loading...
Need help?
General
