7. Functions Customized for Various Subjects and Purposes
214
• If there are any white saturated areas, we recommend compensating the exposure towards
negative (P167) referring to the histogram (P55) and then taking the picture.
• Displayed zebra patterns will not be recorded.
• If you assign [Zebra Pattern] to [Fn Button Set] (P70) in the [Custom] menu, each time you
press the function button to which the setting is assigned, the zebra pattern toggles as follows:
[Zebra 1]
> [Zebra 2] > [OFF].
When [Zebra 2] is set to [OFF], the setting toggles in the order of [Zebra 1]
> [OFF], allowing
you to switch the setting quickly.
Applicable modes:
You can display the recording screen in black and white. This function is convenient when
a black and white screen will make it easier to set focus with Manual Focus.
Settings: [ON]/[OFF]
•
Even if you use the HDMI output during recording, this function will not work for the connected
device.
• Recorded images will not be affected.
Displaying the recording screen in black and white ([Monochrome Live View])
> [Custom] > [Monochrome Live View]
To Next Page
Loading...
Need help?
General
