9. Recording Motion Pictures
238
About the operation sound that is produced when you stop recording
Since motion picture recording stops only after you press the motion picture button, the
sound of the operation may be noticeable. If the sound bothers you, try the following:
–
Divide the last part of the motion picture using [Video Divide] (P274) in the [Playback]
menu.
The motion picture may not be divided near the very end of it. To avoid this, record
approximately 3 seconds longer.
– Set the camera to Creative Video Mode, and use a shutter remote control (optional) to
record motion pictures. (P354)
Enabling/disabling the motion picture button
> [Custom] > [Video Button] > [ON]/[OFF]
•
This function is for preventing accidental operation of the button.
Switching between the angle of view for taking pictures and the one for
recording motion pictures
> [Custom] > [Rec Area] > [!]
(Picture)/[ ] (Motion picture)
•
When the aspect ratio setting is different in still and motion pictures, the angle of view
changes at the start of motion picture recording.
When [Rec Area] is set to [ ], angle of view during motion picture recording is displayed.
• The recording area indicated is an approximation.
• [Rec Area] is not available for 4K photo recording.
To Next Page
Loading...
Need help?
General
