11. Using the Wi-Fi/NFC Function
292
• You can register up to 20 smartphones. When the number exceeds 20, registrations will be
deleted, starting from the oldest touched one.
• Performing [Reset Wi-Fi Settings] will delete the smartphone registration.
• If the camera is not recognized even when touching the smartphone, change positions and try
again.
• Do not touch the smartphone to this camera strongly.
• If there is a metal object between this camera and the smartphone, reading may fail. Also,
putting a sticker around the NFC area may deteriorate the communication performance.
• This function is not available in the following cases:
– When connecting to a PC or a printer
– When recording motion pictures
– When recording with [ ] ([4K Pre-Burst]) of 4K Photo
– When using [Time Lapse Shot]
To Next Page
Loading...
Need help?
General
