329
11. Using the Wi-Fi/NFC Function
1 Select the menu. (P63)
2 Select the favorite history you want to edit, and then press 1.
3 Select the item.
•
Performing [Reset Wi-Fi Settings] clears the history and the contents saved in [Select a
destination from Favorite].
• When connecting to a network to which many PCs are connected by using [Select a destination
from History] or [Select a destination from Favorite], a connection attempt may fail because the
previously-connected device will be identified from among many devices.
If a connection attempt fails, reconnect by using [New Connection].
Editing the history registered to favorites
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Select a destination
from Favorite]
[Remove from Favorite] —
[Change the Order in
Favorite]
Select the destination.
[Change the Registered
Name]
• For details on how to enter characters, refer to “Entering
Text
” section on P84.
• A maximum of 30 characters can be entered. A two-byte
character is treated as two characters.
Save frequently-used Wi-Fi connection settings as favorites
The number that can be saved in the history is limited.
We recommend that you save frequently-used Wi-Fi connection settings by registering
them as favorites. (P328)
Checking the connection detail of a record or favorite
If [DISP.] is pressed when selecting an item in the history or favorites, the detail of the
connection can be displayed.
To Next Page
Loading...
Need help?
General
