Panasonic LUMIX DMC-GX8PRO User Manual

301
11. Using the Wi-Fi/NFC Function
You can send location information acquired with a smartphone to the camera. After
sending the information, you can also write it on images stored in the camera.
•
Once the location information is sent to the camera, you can also write it on images by
performing [Location Logging] (P265) in the [Playback] menu.
• Location information different from that at the time of recording may be written. Keep the
following points in mind:
– Set the camera’s [Home] setting in [World Time] to your region.
– Once you start recording location information with your smartphone, do not change the
camera’s [Home] setting in [World Time].
• Location information cannot be written on images that were recorded when the clock was not
set.
∫ Recording location information and images
1 Start recording location information with the smartphone.
1 Start “Image App”. (P289)
2 Select [ ].
3 Select [Geotagging].
4 Select [ ] to start recording location information.
2 Record images with the camera.
3 Stop recording the location information with the smartphone.
1 Select [ ] to stop recording the location information.
Adding location information to images stored in the camera from a
smartphone/tablet
GPS
2
1
4
3

Panasonic LUMIX DMC-GX8PRO Specifications

General

Sensor Resolution	20.3MP
Image Processor	Venus Engine
Lens Mount	Micro Four Thirds
Viewfinder Type	Electronic
Built-in Flash	No
External Flash Connection	Hot Shoe
Wireless	Yes
Camera Type	Mirrorless
Sensor Size	17.3 x 13 mm
Image Sensor Format	Four Thirds
Sensor Type	MOS
ISO Sensitivity	100-25600
Viewfinder	Yes
Viewfinder Resolution	2, 360k-dot
Screen Size	3.0 inches
Screen Type	Articulating Touchscreen LCD
LCD Screen	Yes
Minimum Shutter Speed	60 sec
Continuous Shooting	10 fps
Video Recording	Yes, up to 4K
Wireless Connectivity	Wi-Fi
Battery	DMW-BLC12
Battery Life	330 shots (CIPA standard)
Weight	487 g