Preparation
- 14 -
Inserting/Removing the Batteries/Card
(Optional)
• Check that the camera is turned off.
• Use alkaline batteries (supplied) or Ni-MH batteries (optional).
• We recommend using a Panasonic card.
1
Slide the battery door
A
or the card door
B
to open it.
C
Press and keep the lever down and slide the door.
2
Batteries:
Insert the batteries with the
(
and
)
poles aligned correctly.
Card:
Insert the card with the label side facing
the back of the camera until it clicks and
locks.
To remove the card, push the card until
it clicks, then pull the card out upright.
• Do not touch the connection terminals on the back side of the card.
• The card may be damaged if it is not fully inserted.
To Next Page
Loading...
Need help?
General
