Preparation
- 19 -
Changing the clock setting
1
Press [MENU/SET].
2
Press
e
/
r
to select [CLOCK SET].
3
Press
q
and perform steps
5
and
6
for setting.
4
Press [MENU/SET] to close the menu.
• You can also set the clock in the [SETUP] menu. (P25)
Note
•
The clock is displayed when [DISPLAY] is pressed several times during recording.
• When batteries have been inserted for more than 3 hours, the clock setting is stored in
the camera for approximately 3 months even if the batteries are removed.
• You can set the year from 2000 to 2099.
• Set the date so that the correct date is printed when you order prints or use the text
stamp. (P90)
• If the clock is set, the correct date can be printed even if the date is not displayed on the
screen of the camera.
To Next Page
Loading...
