29
SQT1404 (ENG)
Recording
●
If the surrounding temperature is high or [Post Focus] recording is performed
continuously, [
] may be displayed and recording may be stopped halfway
through. Wait until the camera cools down.
Select the focus point and save the picture
([Post Focus])
1
On the playback screen, select the image with
the [ ] icon and press
2
Touch the focus point
• If there are no pictures with the focus on the selected
point, a red frame will be displayed, and pictures
cannot be saved.
• The edge of the screen cannot be selected.
• Press [Fn1] to switch to the [Focus Stacking]
operations screen. (→30)
• To highlight in-focus portion with colour, touch [
] .
• To enlarge the display, touch [
] .
• You can make fine adjustments to the focus by
dragging the slide bar during enlarged display.
3
Touch [ ] to save the picture
• The picture will be saved in JPEG format.
●
You cannot choose and save the picture from a TV screen even if the camera is
connected to a TV through an HDMI micro cable.
To Next Page
Loading...
