12
Preparations
SQT1395 (ENG)
Inserting and removing the battery or SD memory
card (optional)
Make sure that the camera is turned off.
1
Slide the release lever ( ) to the [OPEN]
position and open the card/battery door
2
Insert the battery and card, making sure
that their orientation is correct
• Battery: Insert the battery all the way firmly and
check that it is locked by lever (
).
• Card: Insert the card all the way firmly until it
clicks. Do not touch the terminals on the
back of the card.
3
Close the door
Slide the release lever to the [LOCK] position.
■
To remove
• To remove battery:
Move lever (
) in direction of
arrow.
• To remove card:
Push the card until it clicks, then pull the
card out.
Press
Pull out
●
Always use genuine Panasonic batteries (DMW-BLH7E).
●
If you use other batteries, we cannot guarantee the quality of this product.
●
Keep the Memory Card out of reach of children to prevent swallowing.
To Next Page
Loading...
