Preparation
- 32 -
• Refer to P90 for details.
• Refer to P124 for details about the [REC] Mode menu.
• [Fn BUTTON SET] may be disabled depending on the settings.
• The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear different from real life on the LCD monitor. However, this does not affect the
recorded pictures.
• The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD Mode. Press any button to make the LCD monitor bright again.
• If the screen is difficult to see because of bright light shining on it, use your hand or another
object to block the light.
• The number of recordable pictures decreases in Auto Power LCD Mode and Power LCD Mode.
• [AUTO POWER LCD] cannot be selected in Playback Mode.
[CUST. SET MEM.]
Up to 4 current camera settings can be registered as custom
settings.
(Recording Mode only)
[]/[ ]/[ ]/[ ]
[Fn BUTTON SET]
Assign Menu to 4 button. It is convenient to register a Menu that
is used often.
(Recording Mode only)
[FILM MODE]/[QUALITY]/[METERING MODE]/[WHITE
BALANCE]/[AF MODE]/[I.EXPOSURE]/[GUIDE LINE]/
[ REC AREA]/[REMAINING DISP.]/[FLASH]/
[AUTO BRACKET]/[ASPECT BRACKET]
[LCD MODE]
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
… [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
[DISPLAY SIZE]
Change the display size of some icons and menu screens.
[STANDARD]/[LARGE]
To Next Page
Loading...
