- 91 -
Advanced (Recording pictures)
[REC] Mode:
Taking pictures in Custom Mode
You can select one of your own custom settings saved with [CUST. SET MEM.] to suit the
picture-taking conditions.
Initial setting of the Programme AE Mode is registered as the custom settings initially.
Set the mode dial to [ ] or [ ].
A Display custom settings
• When set to [ ]
• When set to [ ]
Press 3/4 to select the custom settings you
want to use.
• In [ ], press [DISPLAY] to display the settings for each menu
item. (Press 2/1 to change between screens, and press
[DISPLAY] to return to the selection screen.)
• Only the main menu items are displayed.
Press [MENU/SET] to enter the settings.
• Saving of the selected custom settings is displayed
on the screen.
∫ When changing the menu settings
Even if the menu settings are changed temporarily with [ ], [ ], [ ] or [ ]
selected, what has been registered will remain unchanged.
To change what has been registered, overwrite the registered data using
[CUST. SET MEM.] (P90) on the setup menu.
Note
•
See the note on P90 for details of the menu that is not stored in the custom set.
>
You can take pictures with the custom settings registered in
the [ ]. ([ ] is displayed on the screen)
>
To steps 2 and 3
To Next Page
Loading...
